Epoxy Fatty Acid Methyl Ester (EFAME)
Epoxy fatty acid methyl ester is a new type of plasticizer which can be effectively replace DOP or DBP.with good compatibility with PVC,low volatility,good stability to heat and light effect,it can be applied to all of PVC plastic products,it can be used in PVC film or artificial leather processing performance.the products are also widely used in wire and cable,refrigerator sealing strip,sheet,pipe material,plastic shoes,etc...
1.High flash point.The flash point of Epoxy Fatty Acid Methyl Ester HM-02 has reached 190 to 195 degrees,The higher flash point, the less to evaporate, which can avoid the explosion and combustion
in the foaming tank during the PVC production process.
2.High epoxy value .The higher the epoxy value ,the less the epoxy value will be reduced when meets
high temperature .the effect of plasticizer will not be reduce , and can reduce the cost of PVC products
with more substitution .
3. No odor. It has no odor, which guarantees that the finished products have no odor and there is
not inoffensive odor in the workshop during rolling film and foaming production.
4. Environmental-protection: It is made of natural plant oil, which has the good environmental-protection
and also meet the EU environmental standards.
5. With good compatibility, low vaporization and good stability to the light and heat, Epoxy Fatty
Acid Methyl Ester could reduce the use quantity of stabilizer.
200kg/drum,1TM drum or flexible freight bag